POLYURETHANE SEALANT PU GREY 310ML - SIROFLEX POLYFLEX HM

Quantity	1	2 - 5	6 - 11	12 - 24	25 - 49	50 - 74	75 - 100	Over 100
Price per item	£4.91	£4.37	£4.16	£3.33	£3.20	£3.08	£2.91	£CALL

ALL PRICES ARE INCLUSIVE OF VAT

Polyurethane Sealant PU Grey 310ml - Siroflex Polyflex HM

COLOUR

DATA SHEETS

COSHH DATA

TECHNICAL DATA

RETURN TO PREVIOUS PAGE

This grey polyurethane sealant is a one component moisture curing, paintable, high modulus polyurethane sealant or adhesive. Has excellent adhesion to most building substrates, is fast curing with permanent and durable elasticity and is non-staining to brickwork. Has first rate resistance to water and UV rays and has permanent elasticity under all climate conditions. Conforms to ISO 11.600 F25 HM.

• Arbothane 1245
• Soudaflex 40 FC
• Sikabond T2
• Sikaflex 221

Siroflex Grey Polyurethane Sealant is ideal for interior and exterior waterproof joints in building and metal constructions. This sealant and adhesive can also be used for gluing, sealing, mounting and anchoring in building applications. For expansion joints in industrial floors and periphery of swimming pools.

Before applying your polyurethane sealant ensure surfaces are clean, dry, free of oil and grease. Priming not usually necessary unless testing indicates a need or subject to water immersion after curing. Gun the sealant firmly into joint ensuring no air is trapped behind. If required place masking tape along edges, removing within 10 minutes of application.

Q.Can you please advise if this is resistant to petrol when cured?
A.Diesel has no effect on the polyurethane, whereas petrol would make the seal slightly increase in volume and become slightly more fragile but it is a very strong adhesive/sealant in the first place. The Siroflex Polysulphide Sealant is resistant to petrol.